call

HP Officejet 3830 Setup

HP Officejet 3830 setup is an important step after purchasing a brand new printer. You can use the easy to follow instructions to setup Officejet 3830 all-in-one printer. However, you require installing Officejet 3830 driver and software for completing HP OJ 3830 setup. Here, you can get the full set of Officejet 3830 setup along with driver install. Also, enable both the primary and the add-on features of HP Officejet 3830 printer to print from anywhere.

HP Officejet 3830 Setup
Figure 1: HP Officejet 3830 Setup

How to Setup HP Officejet 3830 Printer?

The foremost step in oj 3830 setup is to unpack the new HP Officejet 3830 printer. Then, install the cartridges to complete the hardware setup. Connect HP OJ 3830 to network and computer, and install OJ3830 setup drivers and software.

Step 1: Unpack HP Officejet 3830 Printer Driver

  • Open the brand new Officejet 3830 printer box and pull the printer out.
  • Now, clear the blue tapes and the packing material over OJ3830 surface.
  • Lift the scanner lid and remove the packing sheet over the glass.
  • Open the cartridge access door and clear the packing cardboard in.
  • Check the box for HP Officejet 3830 Setup accessories for the cartridges, sample paper, driver disc, and the cables.
  • Now, grab the power cable and proceed to turn on your HP OJ 3830 Setup.

Step 1: unpack HP officejet 3830 printer driver remove from printer box

Step 2: Connect the Power cord to hp Officejet 3830 Printer

Step 2: Connect the Power cord to hp Officejet 3830 Printer

  • Take the power cord from the OJ3830 accessories.
  • Connect the compatible cable end to HP 3830 printer and the other end to the power supply.
  • Here, it is recommended to use the direct wall outlet to avoid any power surge.
  • Now, press the power button on OJ3830 to turn on your printer.
  • Once the printer is on, you can see the Welcome message on the touch display.
  • Your HP OJ 3830 Setup prompts for the basic preference settings.
  • Here, you can choose your desired place, language, time and date.

Step 3: Install HP Officejet 3830 Ink Cartridge

  • After turning on your HP OJ3830 Setup, wait for the cartridge carrier to settle idle.
  • Now, lift the cartridge access door and you can see the carrier, park at the center.
  • Then, unwrap the new ink cartridge for Officejet 3830 Setup from the pack.
  • Peel off the orange tape over the contact heads and place them in the slots.
  • Here, you can use the markings over the carrier for the right installation.
  • After installation, close the access door and proceed with paper loading.
Step 3: Install hp Officejet 3830 ink cartridge
Step 4: load paper into the hp officejet 3830 input tray

Step 4: How to load paper in HP Officejet 3830

  • After installing the cartridges, proceed with loading papers on the input tray.
  • Generally, HP offers a set of sample media to ease the first time Setup.
  • You may also get a suitable standard US letter-sized paper.
  • Now extend OJ3830 paper input tray and slides the guides to the corner.
  • Then, place the papers on the tray and adjust the guides to fit the paper edges.
  • Finally, print a test file or OJ3830 alignment page to test the paper loading.

Step 5: Install Printer Software for HP 3830 Officejet

  • The final step in HP OJ3830 setup is to install the drivers and software on your computer.
  • You can use HP Officejet 3830 Setup driver disc that you get in the box or download it.
  • After you run the disc on your computer, an installation wizard pops.
  • Here, you can see a set of easy to follow instructions for HP OJ3830 driver install.
  • Midway the OJ3830 driver install, connect hp oj3830 Setup to the computer with either USB or wifi.
  • Finally, complete HP 3830 driver installation with Officejet 3830 software install.
Step 5: Install the HP Officejet 3830 Setup Printer Software

HP Officejet 3830 Connectivity Setup

HP Officejet 3830 Connectivity setup can be done with both wired and wireless connections. HP generally offers the USB cable for the wired connection setup. In case of wireless connection, you require the wifi details such as the name and password. However, for either of the connection setup, ensure that you get the suitable HP Officejet 3830 drivers and software.

HP Officejet 3830 USB Cable Setup

You can use this Officejet 3830 manual for USB setup. These steps answer on how to connect to hp Officejet 3830 setup with a USB cable. For this, you may require a 3 meters long Officejet 3830 printer cable and suitable drivers.

Stage 1: Connect HP Officejet 3830 to network.

  • Run the LAN or the Ethernet cable from the router to HP 3830 all in one printer.
  • On a successful connection, check the LAN light and proceed with the device connection.

The next stage explains how to connect HP Officejet 3830 Setup to computer wired.

Stage 2: Connect hp officejet 3830 series to computer wired

  • Use the USB cable setup from the accessories and connect HP 3830 and your computer.
  • Now, your Windows or Macintosh computer asks for a suitable driver and software.
  • Finally, after connecting a computer to hp Officejet 3830 Setup install USB drivers to finish the setup.

HP Officejet 3830 Wireless Setup

HP Officejet 3830 Wireless Setup is complete when you connect HP 3830 printer to both network and laptop wireless. Here are the steps in detail for connecting HP 3830 to network and computer.

Stage 1: Connect HP Officejet 3830 wireless to a network.

  • On your Officejet 3830 printer touch panel, access the menu.
  • Under Settings, choose the Wireless setup wizard to initiate the setup.
  • Now the wizard runs a quick search for the nearby wifi networks.
  • Choose your Wifi name and enter the password to add Hp 3830 to the network setup.

Stage 2: Connect HP Officejet 3830 to Windows or MAC wireless

  • Download the latest version of the HP Smart app for your computer.
  • Now, install the app and use the instructions on the wizard.
  • Add your HP Officejet printer 3830 to your computer through the app.

Note: You can also add any compatible device wireless to HP OJ3830.

How to Setup HP Officejet 3830 on Windows and Mac?

HP OJ 3830 Windows setup can be done with either the USB cable or the wireless mode. However, you require installing HP OJ3830 driver and software for both modes of connection. Here are the steps from Officejet 3830 manual for hp setup with Windows and MAC.

Step1: Establish a connection

  • Establish a secure connection between Officejet 3830 printer and the computer.
  • Here, you can use either the USB cable or the wireless connection.

Type 1: USB setup – Connect the USB cable between HP Officejet 3830 Setup and the Windows/MAC computer.

Type 2: Wireless setup – Add HP OJ 3830 wireless to both network and Windows/Macintosh.

Step 2: Install HP Officejet 3830 Driver and Software

Finally, install HP Officejet 3830 Driver and Software for both USB and Wireless setup.

HP Officejet 3830 Printer setup

How do I set up Officejet 3830 ePrint?

  • OJ 3830 eprint feature enables printing by emailing a document to your printer.
  • You can enable the ePrint and set a custom email address for your HP 3830 through Web Services.

How do I set my Officejet 3830 printer to AirPrint?

  • HP Officejet 3830 Setup Airprint enables printing from any iOS device.
  • The best part here is that you do not require any additional HP Officejet 3830 software to enable the AirPrint feature.

Set up your HP Officejet 3830 printer with Google Cloud Print

  • HP Officejet 3830 Cloudprint feature enables linking your HP ePrint email address and your Google Cloud services.
  • You can print any file straight from the Cloud storage by emailing it to your HP OJ 3830 printer.

The Officejet 3830 Mopria Print supports settings

  • Mopria print option enables printing a file easy from any Android device.
  • However, you require installing the Mopria Service plugin from the Google Play store.
  • You can add your HP OJ3830 printer to your Android phone and print it through the Mopria plugin.
HP Officejet 3830 Troubleshooting
Sometimes, you may face a few recurring issues when you print with Officejet 3830 printer. A few troubleshooting steps can rectify these issues. Here is HP Officejet 3830 Setup user guide to fix the common recurring issues.

Check the Connection Between the Devices

Type 1: USB Connection
  • Check the cable between the devices and disconnect HP 3830 from the network.
  • Disconnect the cable between HP 3830 and the computer.
  • Remove your OJ3830 printer from the default printer list.
  • Now, repeat HP Officejet 3830 setup with USB and add your HP OJ3830 printer to the computer.
Type 2: Wireless connection
  • Disconnect HP OJ 3830 from the network and the computer.
  • Repeat HP OJ 3830 wireless setup and re-add OJ3830 to your computer wireless.

Uninstall and Reinstall HP Officejet 3830 Drivers

  • Check the compatibility of your computer with HP Officejet 3830 Setup.
  • Then, uninstall HP OJ3830 drivers and software from Windows and MAC computers.
  • Now, re-download the compatible HP OJ3830 drivers for your computer OS version and reinstall it.